DHD ECP (Series 52, RM4200D, RM3200D)

This interface connects mAirList to DHD Series 52, RM4200D and RM3200D consoles through the DHD External Control Protocol (ECP). It supports fader start, PFL, channel on/off switching, motorized faders, and the exchange of logic states in both directions.

Configuration

In the configuration app or Control Panel, go to Remote Control and add an interface of type DHD ECP (Series 52, RM4200D, RM3200D) (DHD category).

General

  • Communication: Select either TCP/IP, and enter the Hostname or IP and Port (default 2008) of the DHD core, or select the Serial Port that the core is connected to.
  • Console/Core Type and Firmware Version: Select Firmware 7.x or newer, Firmware 6.x, Firmware 5.x, or RM3200D.
  • Fader Level Notifications: Determines whether the core should report fader level changes to mAirList, either Channel-based or Fader-based, or Off.

Toolbox Import

For easier configuration, export the Audio IDs, Logic IDs and Fader Channels from DHD Toolbox to an “Ext. DHD AudioID/LogicID Export” (*.dpx) or XML Export (*.xp5) file, and click Import Toolbox Data to import that file.

The imported data is displayed on the Logic IDs, Audio IDs and Fader Channels tabs. It allows you to select logics and fader channels by name in the rest of the dialog (the … and Select Fader Channel… buttons), rather than entering numeric IDs.

Players

On the Players tab, select the playlist and player, and set up the assignment:

  • Automatic Setup: Click Select Fader Channel… to choose the fader channel the player is connected to from the imported Toolbox data. This will fill in the fields below.
  • FaderStart logic or fader number: The logic ID of the fader start, or alternatively, a fixed fader number.
  • Fader channel number: The fader channel (used for channel on/off switching, motorized faders, and channel labels).
  • PFL logic: The logic ID for the PFL of the channel.

In the State Indication Logics table, you can enter logic IDs that are set by mAirList to indicate the state of the player (e.g. to light up buttons on the console).

Options:

  • Automatic PFL switch: The PFL of the channel switches the PFL of the player on and off.
  • Use PAUSE/STOP: When the fader is closed, the player is paused rather than stopped.
  • Keep channel on when player is paused
  • Disable channel on/off switching: By default, mAirList switches the console channel on and off along with the player. Check this option to disable this.
  • Enable motorized fader control: Moves the motorized fader along with the player state.
  • Set channel label to item title: Displays the title of the loaded item in the channel display of the console.

Cartwall

The Cartwall Fader settings work the same as for the players (see above). When the cartwall fader is opened, the cartwall goes ON AIR.

In the Player Logic IDs table, you can assign logic IDs to the individual cartwall players, to start them from the console, and to indicate their state.

The options Disable channel on/off switching and Enable motorized fader control are also available for the cartwall.

Voice Tracking

Set up the fader assignment (fader start logic or fixed fader number, or fader channel number with firmware 6.x and up) for the voice tracking Player A, Player B, and Mic channels.

Logic

On the States tab, you can link global mAirList states to DHD logics. For each of the states ON AIR, PFL active, ExtPFL active, AUTOMATION 1 active, and VT active:

  • Logic: The logic that is updated when the state changes in mAirList, and/or changes the state in mAirList when it changes on the console.
  • Outgoing Logic: An optional separate logic that is only set by mAirList.
  • Console is master (request current state at startup): When mAirList connects, the current state of the logic is retrieved from the console and applied to mAirList, rather than the other way round.
  • Invert: Inverts the logic state.

On the Commands tab, you can enter remote control commands to execute when a logic (identified by its address) goes On and Off.

Monitor

The Monitor tab displays the communication with the core, which is helpful for troubleshooting.

Actions

The following actions (DHD category) are available: Set Logic, Set PFL, Set all PFL off, and Set Fader On/Off.