This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

TCP Client

    The TCP Client remote is the counterpart of the TCP Server: mAirList connects to a TCP server, and executes each line received from that server as a remote control command.

    This is useful when the device or software sending the commands can only act as a server, or to connect two mAirList instances (with a TCP Server remote on the other instance).

    Configuration

    In the configuration app or Control Panel, go to Remote Control and add an interface of type TCP Client (Network category).

    • Host name or IP and Port: The address of the TCP server to connect to. The default port is 9303.
    • Password: If set, mAirList sends AUTH <password> to the server after connecting. Use this when connecting to the TCP Server remote of another mAirList instance.
    • Command prefix: If set, only lines starting with this prefix (followed by a space) are executed, and the prefix is removed before execution. All other lines are ignored.
    • Dummy mode: If checked, all incoming data is discarded and no commands are executed. Use this option when the connection is only used to send data from a script.

    mAirList connects automatically when the interface is started, and tries to reconnect every few seconds if the connection is lost or cannot be established.

    Scripting

    A script can send data to the server using the SendString and WriteLine methods of the interface, available through TCPClientRemote(<index>).

    For sending a one-off string to a TCP server without setting up a remote control interface, scripts can use the TCPSendString(Server, Port, Text) procedure.